Ford Mondeo / S-MAX / Galaxy Steering Lock Emulator – With Lock Sound – Plug & Start – No Programming Required | MK17445 | Compatible with Blue Connector Type (Av6N-3F880-Kx)

The Ford Steering Lock Emulator (MK17445) is designed as a direct electronic replacement for the OEM ESCL steering lock used in Ford CD4 platform vehicles including Mondeo MK5, S-MAX, and Galaxy models.

Steering lock failure is a frequent and well-known issue in modern Ford vehicles. When the steering lock fails, the ignition recognizes the key, but the engine will not start because the ESCL module does not unlock. Dealership replacement requires ordering a new steering lock unit and programming it — a costly and time-consuming procedure.

This emulator bypasses the defective ESCL unit and restores full vehicle start authorization instantly. No programming is required. Simply connect the emulator to the existing ESL connector and start the engine.

Manufactured by MK3, this module includes OEM-style lock sound, high-quality electronics, and a BLUE connector type for perfect compatibility with 2014+ Ford ESCL systems.

---

🔧 Features

• System Type: Steering Lock Emulator (ESCL / ELV)

• Fitment: Ford CD4 platform vehicles
  (Mondeo MK5 2014+, S-MAX 2016+, Galaxy 2016+)

• Manufacturer: MK3

• Product Number: MK17445

• Operation: Plug & Start – No programming required

• Connector Type: BLUE ESCL connector (Av6N-3F880-Kx type)

• Lock Sound: Built-in OEM-style lock/unlock sound

• Condition: Brand New

• Weight: 40 g

---

⚙️ Technical Overview

The OEM steering lock (ESCL) contains mechanical parts that often fail over time. When failure occurs:

• The key is detected normally

• The push-start system wakes up

• The engine does not start, because the steering lock does not unlock

Ford dealerships typically replace the entire steering lock unit and adapt it to the vehicle — expensive and slow.

The MK17445 emulator electronically replaces the original ESCL module, permanently bypassing mechanical faults. It works with all 2014+ Ford CD4 platform vehicles equipped with the Av6N-3F880-Kx 4-pin ESCL connector.

---

🛠️ Installation Instructions

1. Turn off the ignition.

2. Remove the original ESCL connector and plug it into the MK3 Emulator.

3. The ESCL system only requires open/close signal input to function.

4. Press the start button and verify the GREEN LED illuminates.

LED Behavior

• Green Light: System ready; vehicle can start.

• Red Flashing Light: A fault code exists — clear it with a diagnostic tool.

---

🚗 Vehicle Compatibility

Ford (CD4 Platform)

• Mondeo MK5 — 2014+

• S-MAX — 2016+

• Galaxy — 2016+

Compatible with ESCL units using Av6N-3F880-Kx 4-pin BLUE connector.