The Hyundai & Kia Smart-Key Steering Lock Emulator is designed to replace and bypass the OEM ESL/ELV steering column lock system used in modern smart-key vehicles. Steering lock failure is one of the most common no-start issues in Hyundai and Kia vehicles—even when the smart key and immobilizer are fully functional.

When the OEM steering lock does not activate, the vehicle will not start. Dealership replacement requires ordering a new ELV unit and programming it to the vehicle, which is costly and time-consuming.

This emulator provides a plug-and-start solution that restores vehicle operation instantly. No coding or programming is required. Simply connect the emulator to the steering lock connector and the vehicle becomes ready to start.

Manufactured by MK3, this module includes high-quality electronics, OEM-style lock/unlock sound, durable connectors, and full compatibility with Hitag-2-based smart-key Hyundai and Kia platforms.

---

🔧 Features

System Type: Steering Lock Emulator (ESL/ELV/SCL)
Fitment: Hyundai & Kia Smart-Key Models (Hitag-2 based systems)
Operation: Plug & Start — No Programming Required
Lock Sound: Built-in OEM-style mechanical lock sound
LED Indicators:
• Green – READY (unlocked)
• Red – POWER (locked)
Condition: Brand New
Use Case: Permanent steering lock replacement or diagnostic bypass

---

⚙️ Technical Overview

The OEM ELV steering lock uses mechanical gears and electronic sensors that can fail unexpectedly over time.

When this failure occurs:

• The smart key is detected normally

• The ignition turns on

• The starter will not activate

• The vehicle displays “Steering Lock Error” or remains silent

Because the ELV cannot unlock the steering column, the car refuses to start.

Dealership replacement requires:

• Removing the original ELV unit

• Installing a new one

• Programming/coding it to the vehicle

This emulator bypasses the entire steering lock mechanism electronically:

• No coding

• No mechanical parts to fail

• Permanent solution

• Works with all Hitag-2 smart-key Hyundai/Kia vehicles

---

🛠️ Installation Instructions

1. Turn off the ignition.

2. Disconnect the original ELV connector from the steering lock unit.

3. If the steering lock is stuck in the LOCK position, keep it away from the vehicle.

4. Connect the Emulator to the OEM ELV harness.

5. Start the vehicle — the emulator immediately takes over ELV operation.

---

🚗 Vehicle Compatibility

Hyundai & Kia Smart-Key Models (Hitag-2 System)
Including but not limited to:

Hyundai / Kia Models:
• i30
• ix35
• Kona
• Rio
• Sorento
• Sportage
• Picanto
• Tucson
• XCeed
• Ceed
• Cerato
• Elantra
• i20
• Santa Fe
• Cadanza
• Optima / K5
• Forte
• Ben 10 (regional naming)

Compatible with ALL Hyundai/Kia smart-key vehicles using Hitag-2 platform.