The SsangYong Steering Lock Emulator is a plug-and-play replacement designed to bypass a faulty ELV/ESL (Electronic Steering Lock) unit found in several SsangYong models. When the steering lock fails, the vehicle will not start even if the key, ignition, and immobilizer system are fully operational. This emulator completely replaces the malfunctioning ELV module, restoring normal start authorization without any programming.

Manufactured by MK3, this emulator delivers stable communication with the vehicle’s Smart Key system and includes built-in lock sound simulation for OEM-like behavior.

Steering lock failure is one of the most common problems in modern SsangYong vehicles. Instead of paying high dealership prices for a new steering lock and long waiting periods for programming, this emulator provides a fast, permanent, and cost-effective solution.

---

🔧 Features

• System Type: ESL/ELV Steering Lock Emulator
• Fitment: SsangYong Korando / Musso / Actyon / Tivoli / Torres / G4 Rexton
• Manufacturer: MK3
• Product Number: MK20100
• OEM-Compatible Part Number: 8756034010
• Operation: Plug & Play — no programming required
• Lock Sound: Integrated OEM-style lock/unlock sound
• LED Indicators:
 – Green READY (lock open – vehicle can start)
 – Red POWER (locked or error state)
• Condition: Brand New
• Weight: 40 g

---

⚙️ Technical Overview

The ELV/ESL steering lock module contains mechanical components prone to internal failure. When this failure occurs:

• The key is detected normally
• The ignition turns on
• The vehicle cannot start because the steering lock does not activate

Dealership repair requires purchasing a new ELV steering lock unit and programming it to the vehicle. This is expensive and time-consuming.

The SsangYong Steering Lock Emulator bypasses the faulty steering lock completely, instantly restoring start authorization with no coding or adaptation.

---

🛠️ Installation Instructions

1. Remove the ELV connector from the original steering lock unit.

2. Ensure the vehicle is in steering-unlock mode (steering lock must be disengaged or removed).

3. Plug the vehicle’s ELV connector into the emulator.

4. Start the engine:
    • Green LED ON → Emulator ready, vehicle will start
    • Red LED blinking → Clear ELV/immobilizer fault codes using any diagnostic tool

Installation takes only a few seconds.

---

🚗 Vehicle Compatibility

SsangYong
• Korando
• Musso
• Actyon
• Tivoli
• Torres
• G4 Rexton

(Compatible with vehicles using ELV P/N 8756034010)